#30 Haunted Tree

As I have mentioned before, I am doing a Haunted Forest/ Faerie Tale Witch Cottage theme in my kitchen this year.

So I awoke one night and realized I must have a haunted tree dividing my kitchen from my living room! I became obsessed with the idea, and immediately started trying to figure out the best way to do this.

First I decided I wanted it to be compact and capable of being broken down in two parts for storage.

It also needed to be tall (my ceilings are 10 ft) but incase I move to a shorter or taller house one day it needs to be adjustable. I also wanted the branches to sprawl across my ceiling. 

I had a lot to consider!

So I decided to use concrete pour molds for the base. 

They are around $10 each for the 12" size. The two I bought, one was actually a little bit smaller and fit snugly inside the other, perfect for what I had in mind!

I thought about using chicken wire, but I really hate using the stuff and if I can avoid it I will. 

I found some flexible black irrigation pipe in our garage and decided to use it as a stopper for the top tube to rest on. 

I hot glued it just a little to hold it n place (about 6" from the top)  then went over it in Gorilla Glue to really make it strong. 

PS. The bottle exploded and made a huge mess. I still have glue on me! 

 See, what a Mess!

I wanted a strong base since its so tall. 

I forgot to get a cheap piece of plywood when I was at the store, but I was into the project by now and not wanting to run back out, I grabbed a round plywood circle I already had laying in the garage and gorilla glued it on the bottom.

When all was dry, I crumbled up newspaper to taper it down. I also cut out a hole for my uplight to go in the back.

For the roots I crumbled up balls of news paper in varying shapes using masking tape to secure them.

I coneccted them with more paper at the joints and more tape.

When I figured out the shapes I wanted the roots, I started filling in gaps with more crumpled paper and tape. Then hen it all got several coats of paper mache and then several more until the base was super strong.

On the top half I started the face.

 I just drew on a face and cut it out with a serrated knife.

Here it is sitting in the bottom half.

Next using Celluclay I built the facial features

I started building up ridges in the tree with twisted up newspaper and tape, then went over in 

more paper mache.

I tried to match the bottom ridges to the top as best I could.
Also, I used tape as a guide on the top half to show me exactly where it met the bottom.

Here are the two halves apart all paper mached 

 and together

For the top branches I used coat hangers and taped them to the tree really good before buliding up and then paper maching over the whole thing.

I wanted to make more branches but I really am behind schedule right now, so it got only a few for this year maybe I will add some next year..

For the bark I decided to use more celluclay because I have a bunch of it. I used a whole bag on this tree.
I would just glob it on and then smooth it out a little in sections.
Then I would get my fingers a little wet and scrape it to make my bark texture, clumps and lumps are a good thing.

Here it is finally dry and ready for the paint.

I used a base coat of a charcoal black color I had on hand called fittingly called  'black magic'.

As I was going I would brush on and blend in (while it was still wet) a brown color in the highlight areas, just to give it a little more depth of color. 

Lastly I dry brushed on a lighter taupe color. 

No closeups of that...Hmm I need to take a good bark pic too and add it here.

I decided for now to just use some tissue paper tacked behind the face diffuse the light a bit.

For the top branches crawling across my ceiling, I can't make them permanent because like I said it needs to store and I don't want to be married to this height incase I move. 

So I took some old branches I had saved from the last tree trimming, using eye hooks and fishing line I attached them to the ceiling with the bases just resting inside the top of my tree.

 Now they have the appearance that they are coming out of the tree but they are really just hanging from the ceiling over it. Also, this way I can add more branches and fan it out as far across my ceiling as I want.

I will be adding some green to the branches as well soon,

 but for now I need to go put away that laundry in the picture.

NOTE:

I will be adding pics soon of the finished tree and it's creepy hanging greenery. 

Also maybe a cleaner house in the next picture.

#29 Vintage Witchy Recipe box

For a while I have been meaning to organize all the Halloween recipes I've collected over the years in a fun way. 

So I was feeling crafty the other day as usual.
On all of my big projects either the paper mache was still drying or I didn't have supplies to continue, and it has been so hot I just didn't feel like going out and shopping.

Anyway, I found an old unfinished recipe box (they sell them in the unfinished wood section at most craft stores). I've had it for a while actually just never could decide what to do with it.

My first thought was  to decoupage on it. So I started looking up vintage Halloween images online. Here are a couple I really liked...

But then I saw an image on a vintage paper hat for sale for $100!

(hmm can't find the link anymore.)

I just fell in love with it. 

So I decided to hand paint the box with a similar design.

First I simply painted the box black and the top of the lid orange with acrylic paints.

Then eyeballing it, I drew the image on in pencil and went over in black paint.

Added more details until I was satisfied.

I glued on a pretty ribbon as trim around the lid, and then sealed the whole thing with a matte varnish.

For the inside dividers, I made tombstone shaped tabs out of black card-stock and wrote on them in white pencil. 

I will probably redo these a little better soon with some of the pretty Halloween paper craft stuff they have out now.

Lastly I just I printed up the halloween recipes on cardstock in the appropriate sizes.  

Now all my witchy goodies are in one organized space. 

#28 Silhouette Plates for a Witch's Kitchen

  So I am doing something a little different this year each room has a theme. The Kitchen is going to be a Faerie Tale Witches cottage, a lot of green and black, moss, branches, a real haunted forest feel. 

Usually in my wall plate holder I display my vintage happy pumpkin plates, but that is not going to work this year so I started thinking of what I could put up there instead. I have all these green plates that I over bought on clearance a few years back. They are the perfect witchy green shade for the kitchen too. 

        So I decided to do the silhouette plates I have seen for years, always liked, but never tried. 

   The first time I saw this was in a Martha Stewarts magazine. So I grabbed out my old Halloween issues and started looking. They have a variation in about every issues, with templates galore. She also has tons on her website or you could use any clip art you like. 

   

    Now I have to take a moment to defend Martha. When I bring her name up many people tell me how evil she is. But to me she is a great champion of Halloween and her Halloween epidoes were always something I looked forward to every year. So maybe she comes off as a B to some people, I don't know her personally to answer that, but she has some fantastic ideas.

Also you really start to question life when a guy dressed as Leather Face, in a bloody apron, carrying severed head lectures you about the Evils of Martha Stewart.  Please, Don't ask.

    So anyway I was drinking my glass of wine on a mellow saturday night and sometimes when I have a glass of wine I feel a little craftiness coming on. At the same time I am inpatient and want quick results.  

So therefore this tutorial is of what I like to call My Drunken Crafts. Maybe I need to make a new category on here.

I could have printed the clip art or copied the magazine images, but I was again impatient. 

Luckily I can freehand alright, so I just copied images from the magazine on regular paper 

in a size that seemed right for the plates.

Getting the image on the plate, there are a couple ways you can do this.

For this one I cut out my shape and traced around it with a sharpie.

Luckily I noticed the below picture was off center before I started. 

If you mess up a little, the sharpie does come up if you rub hard enough right away.

Next I filled it in with ceramic paint. 

As you can see it was kind of hard to get it smooth. 

The brush left brush marks and the sponges left bubbles. 

This is were patience and sobriety would have come in handy. 

I managed to get it to smooth out better by doing a second layer with the brush the next day.

The other way I did it was the opposite.

 I wanted the plate black and the witch green. I have seen this technique before where you can print the image on adhesive paper, but I didn't have any so I used a glue stick and covered all the edges really good and stuck her on the plate. 

Oh is that a glass of wine in the photo? Why yes it is.

Quickly, but with a light amount of paint (to avoid bleeding) I covered the edges

and then the whole plate in black paint.

I pulled up the stencil very gently. and it came out almost perfect, very little bleeding.

Any parts that did, I scraped off before it dried with a blade.

Again here you can see the bubbles I had to fix with a brush coat.

The colors are not as bright on camera for some reason but it's a nice witchy green in person. 

Even though it was all turned out fine, I would not recommend drinking and crafting. 

Also as soon as I can I am going to make some chargers to go behind these. In case you don't know what those are, chargers are big decorative plates that go under regular plates.  I have several ideas

in mind that involve natural materials, to the shabby up the display a bit.

I'll add the picture and how to as soon as I do it.